Belzona 4111 (Magma-Quartz)

An epoxy repair mortar for stone and concrete repair, resurfacing and protection.
Where to Buy

Belzona 4111 (Magma-Quartz)

An epoxy repair mortar for stone and concrete repair, resurfacing and protection.
Where to Buy
Description

Belzona 4111 (Magma-Quartz) is an epoxy repair mortar using a two-component epoxy resin and selected quartz particles for repairing and resurfacing concrete and stonework subjected to mechanical and chemical damage, and for grouting and structural bonding

Note: Epoxy repair mortar, Belzona 4111, uses Belzona 4151 as resin and Belzona 4911 as conditioner.

  • High mechanical and impact strength
  • Provide outstanding long-term abrasion resistance
  • Excellent chemical resistance against a wide range of chemicals
  • Easy to mix and apply with no specialist tools and can be used in small quantities when required
  • No shrinkage irrespective of the thickness applied
  • Resistant to environmental attack
  • Downtime reduction due to its fast-curing properties
  • Application and cure at room temperature – no hot work involved
  • Reduced health and safety risks as it is solvent-free
  • Excellent bonding to metallic and non-metallic surfaces including concrete, brick, marble, stone and many more
  • Repair of floor problem areas such as steps, expansion joints, channels and gratings
  • Grouting, bonding and shimming of equipment such as supports, tiles, pumps and other equipment
  • Versatile material for the repair of loose railings, loading docks, aisles and other facilities

15KG , 675.27 KG, 730.75 KG and 6075.43 KG

Note: Sizing and availability may change per region. Please contact Belzona for details.

* All products are subject to regional restrictions. Check with your local Distributor for more information.

Product Applications

Documents

Similar Products

Can Be Used Together

https://prodapp.belzona.com/api/
https://khia.belzona.com/khiaapi/KhiasByProduct/

Featured Video

Projects

QUESTIONS & ANSWERS

Yes, concrete can be repaired with epoxy. The Belzona 4000 Series is a line of concrete repair epoxy products that can restore concrete substrates.

To apply the epoxy mortar, Belzona 4111 (Magma-Quartz), the surface must be clean, firm, and dry. In addition, it must be free of any paint, tar, and any other coating. To mix the materials, first, remove the Belzona 4111 Aggregate and Belzona 4151 (Magma-Quartz Resins) Base and Solidifier tins from the bucket. Place the empty bucket into the mixer cage. With the mixer running, empty the entire contents of Belzona 4151 Base and Solidifier units into the rotating bucket to achieve a homogenous mix. Immediately, and with the mixer running, slowly add the Belzona 4111 Aggregate into the resin mix until the desired consistency. Within 30 minutes, apply the mixed Belzona 4111 directly onto the conditioned surface with a trowel, float, or other suitable tools. Then, tap down firmly to remove entrapped air, compact it, and ensure maximum contact with the surface. Finally, allow curing. Please see the Belzona 4111  for more information.
The cure time of the concrete resurfacing epoxy, Belzona 4111 (Magma-Quartz), is as follows:
Temperature 41 °F (5 °C) 59 °F (15 °C) 77 °F (25 °C)
To resist pedestrian traffic 16 hours 6 hours 4 hours
Machine hard 24 hours 8 hours 6 hours
For full mechanical hardness 2 days 24 hours 16 hours
For full chemical resistance 14 days 10 days 5 days
Please see the Instructions for Use (IFU) for more information. Belzona 4111 (IFU)